A basic system to get you started on your guidance and proof of placement journey. This allows you an easy way to map out you farm – lay down coverage for proof of placement and track your tasks.

Includes: GFX–350 7” Display, NAV-500 Receiver, 3 year Trimble Rapid Replace Warranty
Optional extras: ViewPoint 30cm Accuracy, ISOBUS UT and TC Unlocks, Remote Coverage Logging, Trimble Ag Software, Precision Farming Connect

Normally $5,800 + GST

A simple system to get you started on your guidance and proof of placement journey but with a 10” display! This allows you an easy way to map out you farm – lay down coverage for proof of placement and track your tasks.

Includes: GFX-750 10” Display, NAV-500 Receiver, 3 year Trimble Rapid Replace Warranty
Optional extras: ViewPoint 30cm Accuracy, ISOBUS UT and TC Unlocks, Remote Coverage Logging, Trimble Ag Software, Precision Farming Connect

Normally $6,000 + GST

A manual guidance and proof-of-placement system but easily allows for steering and other upgrades, without having to change hardware! Still allowing you do to all the basic requirements of manual guidance but with the ability to have 2.5cm correction accuracy as required.

Includes: GFX–350 7” Display, NAV-900 Receiver & Activation, 12 Month Rangepoint 15cm Pass-to-Pass Accuracy, 3- year Trimble Rapid Replace Warranty
Optional extras: ISOBUS UT and TC Unlocks, Trimble Ag Software, Precision Farming Connect

Normally $8,550 + GST

A system fully set up for the future, while meeting your manual guidance requirements as you are upgrading an older system or buying for the first time. Still allowing you do to all the basic requirements of manual guidance but add any level of steering and correction accuracy.

Includes: GFX - 750 10” Display, NAV-900 Receiver & Activation, 12 Month Rangepoint 15cm Pass-to-Pass Accuracy, 3- year Trimble Rapid Replace Warranty
Optional extras: ISOBUS UT and TC Unlocks Remote Coverage Logging, Trimble Ag Software, Precision Farming Connect

Normally $8,200 + GST

For those existing Case or New Holland Tractors that are AutoSteer ready, and you want to get steering. This package completes the machine and gives you 12 months of Rangepoint 15cm Pass-to-Pass accuracy for your first year. You also have the ability to move to Centerpoint 2.5cm Accuracy at any time.

Includes: Nav 3 Controller (CNH Programmed), AG-392 Receiver & Mounting Bracket,12 Month Rangepoint 15cm Pass-to-Pass Accuracy

Normally $26,500 + GST

For those existing Case or New Holland Tractors that are AutoSteer ready, and you want to get steering. This package completes the machine and gives you 12 months of Centrepoint 2.5cm Repeatable accuracy for your first year. You also have the ability to drop back to Rangepoint after your first year.

Includes : Nav 3 Controller (CNH Programmed), AG-392 Receiver & Mounting Bracket, 12 Month Centrepoint 2.5cm Accuracy

Normally $28,000 + GST

Works on all ISOBUS displays. Weather conditions are documented via ISOBUS Task-Controller. Provides field-specific weather information in the cab. Supports on-the-go application decisions. Configurable alarms for certain conditions. Real-time weather monitoring. Record archive

Includes: ISOBUS Weather Station
Requires ISOBUS UT & TC Unlocks for Trimble GFX Displays or factory ISOBUS system.

Normally $6,700 + GST

WeedSeeker® 2 is the next generation spot spray system from Trimble Agriculture. Redesigned for superior weed killing, it delivers all-around improved performance to previous solutions. Using advanced optics and processing power, the WeedSeeker system detects and eliminates resistant weeds. When a weed passes underneath the sensor it signals its linked spray nozzle to precisely deliver herbicide and kill the weed, reducing the amount of chemical applied by up to 90%.

Includes: ISOBUS Midi ECU, WeedSeeker Sensors & Brackets x 2, Solenoids x 2, Other required cabling

Normally $18,500 + GST